Helpful Tips for Maintaining Wood Hydronic Boiler

The boilers are very expensive equipment to repair and even more if they have to be replaced, so it is convenient to make an annual maintenance plan to keep your boiler in optimal conditions. Regular maintenance and repair will not only help you to save money in the long term, but it could also save your life since a defective boiler can be a potential danger to your home and family.

It is also essential to remember that a revised boiler and its daily maintenance is more efficient, so it will be reflected in your energy bills. Luckily, boiler maintenance is not particularly difficult, especially if you follow some of the following recommendations:

Annual Boiler Maintenance

You should check your wood hydronic boiler once a year by a specialized and accredited technician in boiler maintenance, even if it seems to be in good working order. The technician should check, in general, all parts and clean the components. At the end of summer, it is a good time to organize the service, so you can rest assured that your boiler will be in optimal conditions for the winter months.

Scheduled operation

Boilers can present problems if they are not used regularly. Therefore, for good maintenance of boilers, experts recommend that the heating be switched on for ten or 15 minutes from time to time during the summer months, only to keep the boiler running and that no problems arise due to the non-operation of the boiler.

Control low pressure

Wood boiler Australia lose pressure over time, which can affect their operation to occur inefficiently. Check the boiler pressure gauge if you can and, if necessary, put more pressure on the circuit. If you are not sure of what you are doing or the optimum pressure the circuit needs, contact a specialized technician or consult the manual.

Purge the radiators

If your radiators are cooler in the lower part than in the upper part or hear strange noises when the heating is on, that means there is air in the system. Therefore, it is necessary to release the air by purging the radiators. If this is not done, the system will not be working efficiently, causing the pressure indicators to vary and the different zones not be adequately air-conditioned.

Purge the radiators

If your radiators are cooler in the lower part than in the upper part, or hear strange noises when the heating is on, that means there is air in the system. Therefore, it is necessary to release the air by purging the radiators. If this is not done, the system will not be working efficiently, causing the pressure indicators to vary and the different zones not be adequately air-conditioned.

Disconnect the heater before purging the radiators, then turn the purge key to the left and you should hear a hissing sound when the air escapes. When the water starts to drip, close the valve and the work will be finished, although you may have to raise the pressure of wood hydronic.

Warning signs

The leaks, cracks, noises or black soot marks, means you have a problem. So check your boiler regularly and be alert for any warning signs. The sooner it is detected and repaired better before a more serious fault is caused. It is also convenient to make sure that any external vents such as ducts are free of obstructions and dirt.